21.5" Manufacturers Direct Advertising Screen Original TFT Display

• Usage: TV-LCM
• Digital LCD Module Type: All
• Touch Screen Type: C/R
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: YZDP21.5
• Type: LCM
• Response Time: 20ms
• Viewing Angle: IPS
• Display Technology: TFT
• DOT-Matrix Graphic LCD Module Type: Row/Column-Driven Control Type
• LCD Drive Mode: Multiplex Drive LCD Module
• Customized: Customized
• Luminance of White: 250 CD/M2
• White Luminance Uniformity: 75%
• LED Life-Time: 30,000 Hrs
• Surface Treatment: Anti-Glare, 3h
• Interface: Lvds Interface with 2 Pixel / Clock
• Transport Package: Carton
• Specification: Glass electronic products of 21.5" display
• Trademark: jinzhaohui
• Origin: China

Product Description

Introduction
 

HR215WU1-120 is a color active matrix TFT LCD module using amorphous silicon TFT's

(Thin Film Transistors) as an active switching devices. This module has a 21.5 inch

diagonally measured active area with FHD resolutions (1920 horizontal by 1080 vertical

pixel array). Each pixel is divided into RED, GREEN, BLUE dots which are arranged in

vertical stripe and this module can display 16.7M colors. The TFT-LCD panel used for this

module is adapted for a low reflection and higher color type.

 

Parameter	Symbol	Min.	Max.	Unit
Power Supply Voltage	VDD	-0.5	5.5	V
Logic Supply Voltage	VIN	VSS-0.3	VDD+0.3	V
Operating Temperature	TOP	0	+50	ºC
Storage Temperature	TST	-20	+60	ºC

 

Features
 

10 points-touch

OGS touch

LVDS Interface with 2 pixel / clock

High-speed response

6-bit (Hi-FRC) color depth, display 16. 7M colors

High transmittance and contrast ratio, low reflection and wide viewing angle

DE (Data Enable) only

RoHS Compliant
 

Application
 

Desktop Type of PC & Workstation Use

Slim-Size Display for Stand-alone Monitor

Display Terminals for Control System

Monitors for Process Controller

OPTICAL SPECIFICATION

Overview

The test of Optical specifications shall be measured in a dark room (ambient luminance <= 1 lux and temperature =

25° C,Deviation of plus or minus 2 ° C) with the equipment of Luminance meter system (Goniometer system and TOPCONE PR730) and test unit

shall be located at an approximate distance 50cm from the LCD surface at a viewing angle of θ and Φ equal to 0°. We

refer to θØ=0 (=θ3 ) as the 3 o'clock direction (the "right"), θØ=90 (= θ12 ) as the 12 o'clock direction ("upward"), θØ=180 (=

θ9 ) as the 9 o'clock direction ("left") and θØ=270(= θ6 ) as the 6 o'clock direction ("bottom"). While scanning θ and/or Ø,

the center of the measuring spot on the Display surface shall stay fixed. The measurement shall be executed after 30

minutes warm-up period. VDD shall be 5.0V +/-10% at 25°C. Optimum viewing angle direction is 6 'clock.