2.1" 1600RGB× 1600 16.7m Color

• Usage: Small-sized LCM, Monitor LCM, Notebook LCM, Vr/Ar
• Digital LCD Module Type: C/M/T
• Touch Screen Type: Capacitive
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: 2.1jdf-2
• Type: LCM
• Response Time: 6ms
• Viewing Angle: IPS
• Display Technology: TFT
• DOT-Matrix Graphic LCD Module Type: Row/Column-Driven Control Type
• LCD Drive Mode: Multiplex Drive LCD Module
• Customized: Customized
• Luminance of White: 480 CD/M2
• Storage Temperature: -40 to +70 ºC
• Operation Temperature: -10 to +55 ºC
• Display Method: Active Matrix TFT
• Transport Package: Carton
• Specification: Glass electronic products of 2.1" display
• Trademark: jinzhaohui
• Origin: China
• HS Code: 8528591090
• Production Capacity: 90, 000PCS/Year

Product Description

Introduction
 

The 2.1inch TFT-LCD Module is a Color Active Matrix TFT LCD panel using LTPS (Low

Temperature Poly-silicon) TFT's (Thin Film Transistors) as an active switching devices.

This module has a 2.1 inch diagonally measured active area with 1600*1600 resolutions

(1600 horizontal by 1600 vertical pixel array). Each pixel is divided into RED, GREEN,

BLUE dots which are arranged in vertical stripe and this module can display 16.7M

colors. The TFT-LCD panel used for this module is adapted for a low reflection and

higher color type.

 

Features
 

High PPI

Fast response time

High frame ratio

High luminance, low reflection and wide viewing angle

RoHS,Halogen Free Compliant

 

Application
 

Virtual Reality Device

Augmented Reality Device
 

General Specification
 

Display mode	Transmission mode, Normally black
Screen size	2.1" (38.4mm) inch diagonally
Number of pixels	1600(H) × 1600(V)  pixels  1058 ppi
Pixel pitch	8(H) × 24(V) um
Pixel arrangement	RGB stripe
Display colors	16.7M colors 8bit
NTSC Ratio	70.8%
LCM Outline Dimension	41.2(H) × 45.3(V) × 1.66 (T)

Note:

1) Protection film is not included.
 

Absolute Maximum Ratings

 

Items	Symbol	Rating
Logic voltage	VDDI	-0.3 to +1.8 V
Positive Analog Power Supply Voltage	AVDD	-0.3 to +6.0 V
Negative Analog Power Supply Voltage	AVEE	-6.0 to +0.3 V
LED forward current	ILED	45 mA each LED 20% on duty
Humidity (ambient temeprature=Ta)	Ta≤60ºC, 90% RH Max.

Note 1: If the module exceeds the absolute maximum ratings, it may be damaged permanently.

Also, if the module operated with the absolute maximum ratings for a long time, its reliability may

drop. It is not allowed for any of these ratings to be exceeded. Make sure all the design characte

ristics are adequate before the panel is initialed.

Note 2: Temperature and relative humidity range are shown in the figure below.

Wet bulb temperature should be 39 ºC max. and no condensation of water.